renegadetechworks.com - Videos

Model 03 Automode Overview

2014-08-22T19:32:57+00:00

TechWorks ECS Controller Model 03 Auto-mode Overview

Controlled By 3/6 axis integrated Accelerometer

Model 03 Manual Mode Startup

2014-08-22T19:32:57+00:00

Video manual on Model 03 Manual Mode Startup.

the Sport & Tour Lights will go thru 3 different phases during startup:

(1) Burnt Out Bulb Test

(2) Default Startup Mode Indicator i.e. lights will indicate starting in Manual Mode

(3) Default Strut Hardness @ Startup Indicator (i.e. startup in Hard, Medium or Soft).

Model 03 Auto Mode Startup

2014-08-22T19:32:57+00:00

Video manual on Model 03 Manual Mode Startup.

the Sport & Tour Lights will go thru 3 different phases during startup:

(1) Burnt Out Bulb Test

(2) Default Startup Mode Indicator i.e. lights will indicate starting in Auto Mode

(3) Default Strut Hardness @ Startup Indicator (i.e. startup in Hard, Medium or Soft).

Model 03 Using Manual & Auto Mode

2014-08-22T19:32:57+00:00

Video manual on using Manual & Auto Mode for the Model 03

-How to get into Manual mode

-How to get into Auto Mode

-How to control the three different stiffness settings in Manual Mode

-How to control the settings in Auto Mode

Model 03 Setting The Default Startup Mode

2014-08-22T19:32:57+00:00

Video manual on setting the Startup Mode for the Model 03

-You can set the default start up mode to be either Manual Mode or Auto Mode

-You can set the default start up mode struts stiffness settings to be Hard , Medium or Soft

Model 03 Setting The Default LED Brigtness

2014-08-22T19:32:57+00:00

Video manual on setting the default LED Brightness for the Model 03

Model 03 Understanding & Using Diagnostics

2014-08-22T19:32:57+00:00

Video manual on Understanding & Using Diagnostics Signals for the Model 03

-Learn about error codes that will display if a problem is detected with any of the four struts while the car has been running

-Learn how to execute the "Read Diagnostics" Mode so you can determine which specifc struts are causing the error codes that was detected while the car has been running

-Learn how to execute the "Run Diagnostics" Mode so that you can force an diagnostics test routine to test each of the four struts to test for correct operation.

Model 01 Techworks ECS Controller LED Status Lights & Rotory Selector Demonstration

2014-08-22T19:32:35+00:00

Renegade TechWorks Model 01 Electronically Controlled Struts ( ECS ) Replacement Controller Demonstration for Mitsubishi 3000gt & Dodge Stealths using the add-on multicolor status LED's and Rotary Selector Switch.

You can use the Add-on LED Light's & Rotary Selector as part of a retrofiit to late model 3000gt cars that never had the ECS system or as an Add-on to the OEM Factory setup to the early model cars.

Model 01 RenegadeTechworks Mitsubishi 3000gt/Stealth ECS Normal Operation Demonstration

2014-08-22T19:31:14+00:00

A demonstration of Model 01 Normal Operation when using the Renegade Tech Works Mitsubishi 3000gt / Stealth replacement ECS controller with the original ECS Switch & Sport/Tour Lights

RenegadeTechworks Fuse Protection Test

2014-08-22T19:28:09+00:00